Description
For Hero 3+ Black: Plugged to GoPro Hero 3+ Black camera and the built-in microcontroller changes its mode to 3D capture or genlock. This plug is interchangeable with our MewPro 1 boards w/ Arduino Pro Mini and/or can be mingled together with them.
For Hero 4: Plugged to GoPro Hero 4 Black or Silver camera. This plug is interchangeable with our MewPro 2 boards.
An article, introduction to MewPro Cable is to appear soon. Meanwhile please refer the previous document “How to use MewPro Genlock Dongle”.
Features:
- Compact design: Microcontroller and other electronics is inside the plug enclosure.
- Exclusively for genlock and easy to use.
Requirements for genlocking Hero 3+ Black:
- GoPro Hero 3+ Black
- GoPro Dual Hero System
- MewPro Genlock Dongle(s)
Requirements for genlocking Hero 4:
- GoPro Hero 4 Black or Silver
- MewPro Iliad or MewPro Bastet
| Herobus connector | PCB w/ SMD parts soldered | Microcontroller | Software installed | Remark | |
|---|---|---|---|---|---|
| Slave plug only | ✔︎ | ✔︎ | ✔︎ | ✔︎ | for all but camera #0 in dual dongle configuration (see Note) |
| Master plug only | ✔︎ | ✔︎ | ✔︎ | ✔︎ | only for camera #0 in dual dongle configuration (see Note) |
| Herobus connector | PCB w/ SMD parts soldered | Microcontroller | Software installed | Remark | |
|---|---|---|---|---|---|
| Slave plug only | ✔︎ | ✔︎ | ✔︎ | ✔︎ | for all but camera #0 using with Bastet (see Note) |
| Master plug only | ✔︎ | ✔︎ | ✔︎ | ✔︎ | only for camera #0 using with Bastet (see Note) |
Note:The difference between master and slave plugs is only at pre-installed software whether RXI of hardware UART is disabled or not. You can manage the difference after purchase by installing software by yourself.
Resources:
Note: The price has been modified due to technical reasons (25 Feb. 2016).
