Genlock Dongle is ready for purchase in our shop.
Category: Arduino
Made to Order
We will make up your MewPros to capture your best angle.
MewPro is an open source project: anyone can use info published in this website and make anything they want. But sometimes when you are busy or don’t like soldering/programming anything we can help you.
The following is a photo of a recent custom-made MewPro for GoPro Hero 3+ Black with extra sensors and a storage.
Contact us about pricing and details.
Genlocking With MewPro
Building the first prototype of MewPro Genlock Dongle for GoPro Hero 3+ Black is finished. Our shop will sell it after PCB is ready.
As stated in our previous post, 3D video/photo captures by GoPro are very strict and accurate: They require genlock signals of not only VSYNC for every frame but also HSYNC for every scanning line. However, for slow microprocessors like Arduino it is impossible to generate high-frequency HSYNC, so we decided to use the original Dual Hero System as a function generator.
The following is a photo of the prototype we made:
Two green boards are “MewPro Genlock Dongle” prototypes. They are attached to master/slave bacpacs of a GoPro Dual Hero System (two orange boxes connected by a white cable). The master MewPro Genlock Dongle has a wired shutter release connected. The slave Dongle has a GoPro Hero 3+ Black with MewPro connected. The latter connection consists of four signals (and GND), namely, RS-232(Dongle Tx -> MewPro Rx), HSYNC, VSYNC, TRIG.
MewPro Genlock Dongle emulates GoPro camera, and as a result we succeeded in getting these signals. The signals can be fed to as many numbers of GoPros with MewPro as you like. The settings of master camera will be automatically copied to of these slave cameras by using RS-232, as original Dual Hero is doing it using I2C.
Schematics and source code for MewPro Genlock Dongle will be published in this blog when the PCB is ready.
Genlock MewPro Is Pending
GoPro Hero 3+ Black needs not only VSYNC but also HSYNC for genlock, today we found by investigating signals from Dual Hero Bacpac. Thus it never be possible that slow microprocessors like Arduino Pro Mini act as a generator for HSYNC pulses of microsecond-order period.
Capturing in 3D two Hero 3+ Black cameras are now known to work in a strictly synchronized manner: they sync both at the beginnings of every horizontal line (HSYNC) and at the starts of every frame (VSYNC). We thought that VSYNC was suffice, thus we wrote “Genlock MewPro Is Coming Soon” as the previous post in the blog. But that is proved to be not so easy to coming soon. We are now planning to make something new to sync two or more GoPros by using MewPros and an external HSYNC/VSYNC generator. So please stay following this blog if you are interested in genlock.
We wrote in the previous post that VSYNC is the simple pulse wave of period equal to the frame time and of duration 5μs at pin 10 in Herobus. HSYNC is also a simple pulse wave, which is at pin 20 in Herobus (the pin is formerly known as “Left Audio Out” or “pin 11”). For your information we publish the pinout of the white cable between the left and the right bacpacs of Dual Hero System:
Update: We succeeded in making MewPro Genlock Dongle (6 Feb 2015)