Posted on Leave a comment

Sample Videos by Four H3+B and Genlock Dongle

PCB of Genlock Dongle has arrived for us. Here are example shots by using it.

Tonight I went nearby streetcar station and test the dongle. The equipment is as in the following photo and four GoPro Hero 3+ Blacks.

Genlock Dongle connected to 4 MewPros
Genlock Dongle connected to 4 MewPros

(FYI: There are three dongles in the photo above; Connected, box opened, the reverse side.)

I set the cameras on the platform.
IMG_6156

And shoot.



Note: These videos are completely untouched. No editing at all. This is why three videos are upside down. 🙂

Next post of this blog will be the announcement the item being ready for purchase. So stay tuned.

Posted on Leave a comment

Made to Order

We will make up your MewPros to capture your best angle.

MewPro is an open source project: anyone can use info published in this website and make anything they want. But sometimes when you are busy or don’t like soldering/programming anything we can help you.

The following is a photo of a recent custom-made MewPro for GoPro Hero 3+ Black with extra sensors and a storage.
madetoorder
Contact us about pricing and details.

Posted on Leave a comment

Genlocking With MewPro

Building the first prototype of MewPro Genlock Dongle for GoPro Hero 3+ Black is finished. Our shop will sell it after PCB is ready.

As stated in our previous post, 3D video/photo captures by GoPro are very strict and accurate: They require genlock signals of not only VSYNC for every frame but also HSYNC for every scanning line. However, for slow microprocessors like Arduino it is impossible to generate high-frequency HSYNC, so we decided to use the original Dual Hero System as a function generator.

The following is a photo of the prototype we made:
genlock
genlock-fig

Two green boards are “MewPro Genlock Dongle” prototypes. They are attached to master/slave bacpacs of a GoPro Dual Hero System (two orange boxes connected by a white cable). The master MewPro Genlock Dongle has a wired shutter release connected. The slave Dongle has a GoPro Hero 3+ Black with MewPro connected. The latter connection consists of four signals (and GND), namely, RS-232(Dongle Tx -> MewPro Rx), HSYNC, VSYNC, TRIG.

MewPro Genlock Dongle emulates GoPro camera, and as a result we succeeded in getting these signals. The signals can be fed to as many numbers of GoPros with MewPro as you like. The settings of master camera will be automatically copied to of these slave cameras by using RS-232, as original Dual Hero is doing it using I2C.

Schematics and source code for MewPro Genlock Dongle will be published in this blog when the PCB is ready.